Boot Cover with Sole 10″ High. Serged Seams. White.
Seams and closures have less barrier than fabric. Note: for protection from hazardous or infectious liquids, additional barrier tests are required to establish suitability for use. CAUTION: This information is based upon technical data that TK believes to be reliable. It is subject to revision as additional knowledge and experience are gained. We makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user’s responsibility to determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under the specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures may provide less barrier than the fabric. If the fabric of Boot Cover with Sole becomes torn, abraded, or punctured, end-user should discontinue use of garment to avoid compromising the barrier protection. SINCE CONDITIONS OF USE ARE OUTSIDE OUR CONTROL, WE MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE AND ASSUME NO LIABILITY IN CONNECTION WITH ANY OF THIS INFORMATION. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of others covering any material or its use. Data presented does not comprise a product specification. Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Silicone Statement: In the past, we found that threads and zippers can be the most significant source of silicone oil contamination in garments. We specifies that thread and zippers used in IsoClean® and ProClean® garments be manufactured without the use of silicone oils. For end uses with concerns about contamination with silicone oils or any other contaminants, the best practice is to audit inbound materials, including garments, for those contaminants. Latex Statement: As of January 1, 2006, TKproduction specifications exclude use of components containing natural rubber latex in the manufacture of TK Tyvek® IsoClean® and ProClean® garments. Anyone who begins to exhibit allergic response during the use of TK products should immediately cease using these products. Measurements are approximate values intended to assist in proper size selection. Normal variability may result in slight differences in actual garment sizes.
We support the activities of the World Health Organization. Please read on the website all the advices to be always informed about the latest news of COVID-19. Watch also on our News Section the video advices to prevent your contamination.